FOR QUANTITY PRICING PLEASE CONTACT US AT 347-692-8009
OR BY E-MAIL AT SALES@CCTVSBH.COM
SECO-LARM EVT-PBM-V17 KEYSTONE TYPE PASSIVE VIDEO BALUN
Product Description
The EVT-PBM-V1x is the easy way to quickly install any style of CCTV cameras throughout an entire building or an entire campus without expensive coax cable. These snap-in video baluns fit in standard modular single-gang wall plates with a 9/16" x 5/8" (16 x 14.5 mm) hole, such as those from Levitron or ICC. They can be used to prewire a new building, or to retrofit an existing building. Just put one plate with a snap-in video balun in each room which might be protected by a CCTV camera, and run low-cost CAT 5 or CAT 5e cable from the balun to a centralized DVR or passive video hub.
For CCTV cameras at up to 2,000 ft. (610m) away. Up to 0.6 miles (1km) when used with active receiver. Modular snap-in connector fits standard single gang wall plates. Surge protection. Choice of gold-plated male or female BNC connector. Built-in RJ-45 female connector on back for easy plug-in of low-cost CAT 5 or CAT 5e cable with standard RJ-45 male plug. Use with low-cost CAT 5 cable instead of costly coaxial cables. See SECO-LARM's CA-171T-02Q RJ45 male to terminal block adapter.
Specifications
Video Format RS170, NTSC, PAL, SECAM, CCIR Maximum Input 1vpp Insertion Loss < 2dB per pair from DC ~ 8 Mhz Return Loss >-15dB from DC ~ 8 Mhz Frequency Response Frequency Response Attenuation 6.6 dB/1000 ft. @ 1MHz Common Mode Rejection 40 dB @ 8 MHz Impedance Coax, Male BNC: 75 Ohms @ 1 MHz Power No power required. Temperature Range 32º~131º F (0º~55ºC) Humidity Range 0 ~ 95% Wire Type UTP (Unshielded Twisted Pair) Wire Category Category 2 or better. Best if > CAT 5e UTP Connection RJ-45. Pins 7 & 8. Reverse polarity sensitive. Case White ABS Plastic Dimensions (male) 21/4" x 3/4" x 15/16" (57 x 19 x 24mm)
For CCTV cameras at up to 2,000 ft. (610m) away. Up to 0.6 miles (1km) when used with active receiver. Modular snap-in connector fits standard single gang wall plates. Surge protection. Choice of gold-plated male or female BNC connector. Built-in RJ-45 female connector on back for easy plug-in of low-cost CAT 5 or CAT 5e cable with standard RJ-45 male plug. Use with low-cost CAT 5 cable instead of costly coaxial cables. See SECO-LARM's CA-171T-02Q RJ45 male to terminal block adapter.
Specifications
Video Format RS170, NTSC, PAL, SECAM, CCIR Maximum Input 1vpp Insertion Loss < 2dB per pair from DC ~ 8 Mhz Return Loss >-15dB from DC ~ 8 Mhz Frequency Response Frequency Response Attenuation 6.6 dB/1000 ft. @ 1MHz Common Mode Rejection 40 dB @ 8 MHz Impedance Coax, Male BNC: 75 Ohms @ 1 MHz Power No power required. Temperature Range 32º~131º F (0º~55ºC) Humidity Range 0 ~ 95% Wire Type UTP (Unshielded Twisted Pair) Wire Category Category 2 or better. Best if > CAT 5e UTP Connection RJ-45. Pins 7 & 8. Reverse polarity sensitive. Case White ABS Plastic Dimensions (male) 21/4" x 3/4" x 15/16" (57 x 19 x 24mm)
